Welcome to Gavilion
0
RFQ
0
Wishlist
0
Cart
ALL CATEGORIES
Create RFQ

Browse Categories

Transverse conveyor TS 2plus

Transverse conveyor belt sections TS 2plus

Transverse conveyor belt sections TS 2plus

Specifications

  • Recommended accessories 2x HQ 2 for transverse conveyor, Connection kit for installing the belt section between the ST 2/… conveyor sections,Section supports SZ 2/..., Connection kit for installing the belt section between the ST 2/… conveyor sections,Section supports SZ 2/...,Lift Transverse Unit HQ 2/O, Connection Kits,Section supports SZ 2/...,LU 2 Automatic Lubrication Unit
  • Delivery information Fully assembled
  • Conveyor medium Duplex chain (suitable for use in an EPA), Toothed belt (suitable for use in an EPA)
  • Nominal speed [vN] 0 m/min ohne Motor und ohne Getriebe,6 m/min,9 m/min,12 m/min,15 m/min,18 m/min

Downloads

Products

Lifts

Lifts

Specifications

  • Gear motor [GM] 0 = mit Getriebe, ohne Motor, ohne Kompaktumrichter,1 = mit Getriebe, Motor und Kompaktumrichter
  • Notice Total lift height h<sub>T</sub> ≥ 250 + H,Lower transport level H1: stroke s = H - H1, 400 ≤ s ≤ 1500
  • Scope of delivery Incl. 2 x sensor M12x1, S<sub>N</sub> = 8 mm L = 45 mm, 3842557633,Incl. kit for position sensing (for 2 x sensor 3842557633),Incl. protective cover
  • ESD Yes

Downloads

Products

Lift transverse units TS 2plus

Lift transverse units TS 2plus

Specifications

  • Workpiece pallet weight [mG] 30 kg, 50 kg, 128 kg, 240 kg
  • Recommended accessories Damper DA 2/100-B for outfeeding of the workpiece pallets WT 2, WT 2/F, WT 2/H or WT 2/F-H; required for v<sub>N</sub> <gt/> 12 m/min or total weight of workpiece pallet ≥ 30 kg,Rocker WI 2/…, WI/M and dampers DA 2/100-C for infieeding of the workpiece pallets WT 2 and WT 2/F, Damper DA 2/60 for the outfeeding of workpiece pallets at v<sub>N</sub> <gt/> 9 m/min,Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets, Damper DA 2/100-B for outfeeding workpiece pallets WT 2, WT 2/F, WT 2/H or WT 2/F-H, required when v<sub>N</sub> <gt/> 12 m/min or total weight of the workpiece pallet ≥ 30 kg,Rockers WI 2/…, WI/M and damper DA 2/100-C for infeeding the workpiece pallets WT 2 and WT 2/F, Damper DA 2/60 for outfeeding workpiece pallets at v<sub>N</sub> <gt/> 9 m/min,Rockers WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for infeeding the workpiece pallets, Dampers DA 2/100-E, DA 2/150-E or a fixed stop (included in the scope of delivery) can be used for outfeeding the WT 2, WT 2/F, WT 2/H and 2/F-H workpiece pallets. Damper DA 2/100-C can be used at the belt end for outfeeding a WT 2 or WT 2/F workpiece pallet.,Dampers DA 2/100-H or DA 2/250-H for outfeeding of the workpiece pallets WT 2/H and WT 2/F-H,A fixed stop (included in the scope of delivery) or the DA 2/100-C damper can be used for infeeding the WT 2 and WT 2/F workpiece pallet. This is also possible in combination with rocker WI 2, WI 2/X, WI 2/D, WI 2/M.,The DA 2/100-H and DA 2/250-H dampers can be used for infeeding the WT 2/H and WT 2/F-H workpiece pallets., Dampers DA 2/150-E, DA 2/100-E for outfeeding of the workpiece pallets WT 2, WT 2/F, WT 2/H or WT 2/F-H; required for v<sub>N</sub> <gt/> 9 m/min or total weight of workpiece pallet <gt/> 30 kg/cm,Rocker WI 2/…, WI/M and dampers DA 2/100-C for infieeding of the workpiece pallets WT 2 and WT 2/F
  • ESD Yes
  • required compressed air connection [pmin] 4 bar

Downloads

Products
The website uses cookies to ensure you get the best experience on our website.